1

Basic parameters

power source

Power supply: single-phase 220V; rated power: 2KW;

Compressed air: 0.55MPa±5%, 55 liters/min;

Mold specification

Diameter φ 16 ~ φ 90mm ; Square: 85mm×85mm

The allowable height range of the total height of the upper and lower mold cores (including the preform): 22mm~68mm Scope of application: one cavity for one mold, multiple cavities for one mold

Dimensions

2100(L)×1300(W)×2150(H) ; Approx. weight: 1350kg

3

drive mode

High precision electric
cylinder cylinder

High-precision electric cylinder and SMC cylinder

4

Processing cycle

around 60s

Depending on the processing model

5

Tray capacity

Finished tray size

One layer; it depends on the processing model

Dimensions of the preform tray

One round layer; it depends on the processing model

Specification and size of defective product tray

It depends on the processing machine

6

Air purification

FFU fan unit

Realize the air repurification of the small environment of the equipment

7

visual system

vision

Monitor the cosmetic condition of molds and lenses

8

Mold, lens and preform transfer

transfer

Transfer of molds, lenses and preforms using pneumatic cylinders, pneumatic fingers, electric cylinders, error correctors and through-beam photoelectric sensors

9

Environmental requirements

humidity

30-60% , but no condensation

temperature

Normal temperature 20-28°C, but no condensation